Cross-industry · Product Knowledge
State the addition basis clearly
An amount is incomplete without the basis to which it applies.
Educational guide · 2026-09-28 · Product-specific conditions require confirmation.
In this guide
About this demonstration
This page demonstrates the planned content and review structure. It is not an approved product recommendation, verified customer result or confirmed service commitment. Filled fictional examples illustrate the content. Replace them with authorised source material before a factual release.
The practical question
An amount is incomplete without the basis to which it applies.
Do not treat a volume amount and a mass amount as interchangeable.
A working sequence
1. Record preparation mass or volume
Record the responsible person, the source record and any unresolved question for this step.
2. Identify the treated-material basis
Record the responsible person, the source record and any unresolved question for this step.
3. Retain units
Record the responsible person, the source record and any unresolved question for this step.
4. Obtain approved instructions
Record the responsible person, the source record and any unresolved question for this step.
Worked demonstration
ILLUSTRATIVE TRAINING EXAMPLE — fictional records, not a Sunson trial or product instruction.
An illustrative instruction states a mass-based rate, while the operator records only a pump setting.
| Record | Completed example | Review action |
|---|---|---|
| Calculation-only input | 1,000 kg material; illustrative rate 0.2 g/kg. | These are invented arithmetic inputs, not a recommended dose. |
| Unit conversion | 1,000 × 0.2 = 200 g = 0.2 kg preparation. | Mass and volume cannot be interchanged without additional information. |
| Record to retain | Material mass, preparation mass, product identity and source instruction. | A pump setting alone does not establish the amount delivered. |
The calculation is reproducible, but it does not approve the illustrative rate or establish product suitability. Use the actual authorised rate for a real trial.
Interpretation and limitations
Do not treat a volume amount and a mass amount as interchangeable.
This note is a preparation method, not a product-specific procedure. Product identity, operating limits and test requirements must come from the approved source.
Document control
FILLED DEMONSTRATION — all example identities, values, dates and quotations below are fictional; they do not describe Sunson products, customers or company facts.
Demonstration draft · prepared 28 September 2026. Author: Demo reviewer (fictional example). Technical reviewer: Demo reviewer (fictional example). Source procedure: DEMO-PROCEDURE-01, revision 1 (fictional example). No customer or trial outcome is represented.